About The Author

Easy Ways to Protect a Boiler

When a boiler is properly maintained and protected, it produces hot air in a very safe manner. If you don’t know how to protect a boiler before and after winter, these strategies can help.

Use a Deaerator

A deaerator is a helpful component that eliminates oxygen and other types of gases from water. If oxygen dissolves in feedwater, it can make various surfaces rust within a boiler.

The process of performing an inspection in order to find a corrosion problem is simple since dissolved oxygen always damages the walls on pipes that are connected to a boiler. If a deaerator is needed, you’ll see oxides on different metal pipes.

Daily Routines

Each day, you should inspect the area around the boiler. If you find any leaking water under the boiler, you’ll need to implement procedures to stop the leak. During the inspection, ensure that there are no obstructions near the unit as they can hide a leak.

When you activate the boiler, pay attention to the control panel. If this screen has error codes, you’ll need to make notes so that you can give the error messages to a reputable service contractor.

Monthly Routines

Monthly maintenance routines will involve the gas vent pipes and the combustion air pipes. You must inspect these parts for blockages, leaks, and deterioration. If you have a condensing boiler, thoroughly inspect the drain trap and PVC fittings for clogs every month.

Periodic Routines

From time to time, you must check the hydronic pipes for water leaks. You’ll also need to schedule an appointment for a low water cutoff test.

These strategies can help you take care of a boiler. If you need deaerator parts, you can obtain them from a store that specializes in maintenance hardware.